product
BARMIZ LEP EP2
- Description :
They are specially recommended for genral-purpose gear and bearing application operating from low to medium speed and moderate temperature. It has the ability to minimize wear on contact surfaces and does not run out of bearing under constant shear condition. When the component are usually exposed to humdity or corrosive atmosphere, it will protect gear or bearing from moisture damage or water wash out.
Typical area are paper machine wet-end bearing, construction equipment with heavy loaded plain/anti-friction bearing. Conveyors and mobile mining and forestry equipment. Under the motor vehicles industry, it meets the Mercedes Benz-delivery specitication: DBL 6804.00-operating material sheet 267.
Properties |
EP00 |
EP0 |
EP1 |
EP2 |
EP3 |
Test method |
Thickener |
Lithium |
Speciality |
|
|||
Service temperature range for automatic lubrication |
-30 to +130°C |
-30 to +110°C |
-30 to +110°C |
-30 to +130°C |
-20 to +150°C |
|
Temp peak admissible for a short period |
+140°C |
+130°C |
+130°C |
+140°C |
+170°C |
|
Permanent temperature above 140°C require regreasing at shorter intervals subject to thermal load. |
||||||
Drop point |
>195°C |
+200°C |
Din iso 2176 |
|||
penetration |
400bis430 |
355-385 |
308 |
265bis295 |
235 |
DIN ISO 2176 |
Water resistance |
1-90 |
|
DIN 51807 T1 |
|||
Corrosion protective propeties |
Corrosion degree 0 |
|
DIN 51802 |
|||
Copper strip test |
Corrosion degree 1 |
|
DIN 51811 |
|||
Base oil viscosity at 40oC |
50mm2/s |
65mm2/s |
159mm2/s |
155mm2/s |
177mm2/s |
DIN 51562 |
FAG-FE9-test |
F50>100h |
|
||||
TImken test O.K. load |
35Ib |
35Ib |
35Ib |
45Ib |
45Ib |
ASTM D-2509 |
Denomination |
KP 2K -30 |
DIN 51502 |
Pail:
- 5 Kgs
- 17 Kgs
ARALUBE BARMIZ LEP 2( EP00/EP0/EP1/EP2)
They are specially recommended for genral-purpose gear and bearing application operating from low to medium speed and moderate temperature. It has the ability to minimize wear on contact surfaces and does not run out of bearing under constant shear condition. When the component are usually exposed to humdity or corrosive atmosphere, it will protect gear or bearing from moisture damage or water wash out.
Typical area are paper machine wet-end bearing, construction equipment with heavy loaded plain/anti-friction bearing. Conveyors and mobile mining and forestry equipment. Under the motor vehicles industry, it meets the Mercedes Benz-delivery specitication: DBL 6804.00-operating material sheet 267.
ARALUBE BARMIZ LEP 3
They have close similarity with LEP seies except the base is formulated with Molybdenum Disulfides. Basic properties are designed for application in truck fleets, mobile equipment and plant machinery that require EP anh shock loading properties.MOS2 features its superiority as lubricating solids to its unique plate-liked structure atoms that usually react under load and temperature. It wills fuses with the metal surface to provide aprotective reinforcement and enhance load-carrying ability. Typical lubrication area of high loaded bearings(e.g.pivoting bearing, pins, shafts, and joints on trucks ) threaded spindles and guides of lifting units.
Provides superior protection for equipment against, heavy loads, dirt, dust, water, and heat.
PRODUCT OF CHOICE FOR ALMOST EVERY HEAVY DUTY APPLICATION
|
|
|
|
Aralube Barmiz LEP are a series of multi-purpose grease make of highly refined non-aging base stocks with well-selected additives, containing lithium 12-hydroxystearate as he thickener. These products are smooth texture and stable to exerted load and accerated temperature. Dropping point has been identied in a range from approximately 170 to 200 C,it is somewhat better than the sodium soap based grease under the long term operating condition. Couple with the basic properties, these greases alo incorporating extreme pressure/ anti wear additives for heavy duty and shock resistant which in turn incorporating extreme pressure / anti wear additives for heavy duty and shock resistant which in turn increase the life of equipment service life.