- Bearings
- Gears
- Joints
- Chasis
- More
product
Teflon Heavy Equipment Grease
- Description :
DuPont® Heavy Equipment Grease with Teflon® fluoropolymer is formulated to meet the extreme conditions encountered on off-highway construction equipment, as well as the demands of heavy equipment used in farming, mining and trucking. Formulated with high viscosity base oils, thickened with a lithium complex binder, and fortified with both molybdenum disulfide and Teflon® fluoropolymer to deliver load carrying and anti-wear performance.Contains 3% molybdenum.
Note: not recommended for automotive applications.
Typical Properties | THE |
Temperature Range | -10°F to 350°F |
Thickener | Lithium Complex |
Texture | Tacky |
Color | Grey |
Odor | Mild Petroleum |
Solubility in Water | Insoluble |
Dropping Point | 500°F |
Weld Point, Kg | 400 |
Base Fluid Type | Petroleum Mineral Oil |
Viscosity SUS @ 100°F | 1715-1875 |
Viscosity SUS @ 210°F | 110-122 |
Viscosity cSt @ 40°F | 327-350 |
Viscosity cSt @ 100°F | 22-24.5 |
Viscosity Index, Min | 80 |
Cartridge |
Tub |
Pail |
14 oz. |
16 oz. |
35 lb |
Teflon Heavy Equipment Grease | Formulated for extreme conditions encountered in highway construction, farming, mining and trucking
Heavy Equipment Grease with Teflon™ fluoropolymer is formulated to meet the extreme conditions encountered on off-highway construction equipment, as well as the demands of heavy equipment used in farming, mining and trucking. Formulated with high viscosity base oils, thickened with a lithium complex binder, and fortified with both molybdenum disulfide and Teflon™ fluoropolymer to deliver load carrying and anti-wear
performance.
Heavy Equipment Grease with Teflon™ fluoropolymer contains a blend of extreme pressure and anti-wear additives, and rust and oxidation inhibitors for wet conditions. A dropping point of 500ºF (260ºC) ensures retention in high temperature applications. Recommended operating temperature range: -10ºF (-23ºC) to 350ºF (177ºC).
Note: not recommended for automotive applications.
Features:
• Film strength & mechanical stability
• Protection against wear & shock loads
• Low water washout (5%)
• Operating temperature range: -10ºF (-23ºC) to 350ºF (177ºC)
• Contains 3% molybdenum
• Meets NLGI #2
Directions For Use:
For best results, remove old grease before applying.
- ASTM D2265
- ASTM D217
- ASTM D1743
- ASTM D2509
- ASTM D1264