PRODUCTS
- ARALUBE SPECIALTY GREASES & LUBRICANTS
- + Barmiz LEP Series
- + KRANTZ PLU SERIES
- + KRANTZ LCP SERIES
- + Krantz BHS 2 Series
- + CHAINLUB NCL SERIES
- + ARALUBE COOLCUT SERIES - NEAT CUTTING OIL
- + ARALUBE TERULAN CX SERIES - RUST PREVENTATIVES OIL
- + ARALUBE GESELL CTA SERIES - MACHINE TOOL SIDEWARY OIL
- + ARALUBE ZULLIT EDM SERIES -EDM OIL
- + ARALUBE KRALL IPL 25 SERIES- PUNCHING OIL
- + ARALUBE COOLCUT COOLANTS SERIES
- KRYTOX GREASES & LUBRICANTS
- + TelFon Lubricants
- + Krytox & Lubricants
- + Corrugated Carton Box Industry
- + Gearbox for all types of industry
- + Rubber Tire Industry
- + KRYTOX GPL (General - Purpose Lubricants) Greases & Oils Series
- + Aerospace Industry
- + Electronies / Semi Conductor Industry
- + Heavy Duty Load Industry Equiments XHT Series
- + Automotive Industry AUT Serise
- + Vacuum pump industry
- + Chemical Petrochemical & Oxygen Gas Industry
- + Thread sealant industry
- + Bearing general purpose all industry
- SPECIALTY SOLVENTS -VERTREL
- Chemours Krytox Viet Nam
INDUSTRIES
VIDEO
XHT-BD Series - Description
Krytox XHT-BD series oils are special extreme high temperature greases with low oil evaporation that are thickened with a non-melting thickener to allow use at temperatures above the melting point of common greases. They have excellent lubrication over a broad temperature range. Krytox XHT-BD series greases are nonflammable and chemically inert. Krytox allows extended lubrication intervals and longer equipment life.
Krytox XHT-BD greases are designed for use where the temperatures are in the 288 °C (500 °F) range and higher, where there is a danger of melting the standard PTFE thickener. This grease uses a special non-melting high temperature thickener. The base oil is an extremely viscous oil that provides good viscosity and lower evaporation at high temperatures. Krytox XHT-BD greases are for use in low speed bearings or in pillow housings and will shear at high speeds, causing loss of oil in sealed bearings. The oil in the grease can begin to slowly evaporate at temperatures above 330 °C (626 °F), and this will occur at an increasing rate as temperatures increase. Re-lubrication could be required at these temperatures to achieve optimum life.
XHT-BD Series - Product Categories
-
XHT-BD
Krytox XHT-BD greases are designed for use where the temperatures are in the 288 °C (500 °F) range and higher, where there is a danger of melting the standard PTFE thickener. This grease uses a special non-melting high temperature thickener.
Lowest viscosity grease in the XHT-BD Series.
READ MORE -
XHT-BDZ
Krytox XHT-BD greases are designed for use where the temperatures are in the 288 °C (500 °F) range and higher, where there is a danger of melting the standard PTFE thickener. This grease uses a special non-melting high temperature thickener.
Highest viscosity grease in the XHT-BD Series.
READ MORE